Memory Management; Copy A Block - Barco VISION 701 MULTIMEDIA Owner's Manual

SERVICE MODE

Memory management

Highlight 'Memory management' by
pushing the control disk up or down
and press ENTER to display the
memory management menu.
Within the memory management
menu, the following items can be
consultated or executed :

- copy a block

- delete a block
- delete all blocks
- all settings to midposition
- R & B convergence to mid
- Gr convergence mid (only if green
convergence is available)
Copy a block
The copy a block function copies
the settings of a selected block into
the active block.
Highlight copy a block with the con-
trol disk and press ENTER.
R5975228A BARCOVISION 701 MULTIMEDIA 200697
SERVICE MODE
PROJECTOR SET-UP
MEMORY MANAGEMENT
COMMON SETTINGS
I2C DIAGNOSTICS
Select with
then <ENTER>
<EXIT> to return.
MEMORY MANAGEMENT
COPY A BLOCK
DELETE A BLOCK
DELETE ALL BLOCKS
ALL SETTINGS TO MIDPOS
R & B CONVERGENCE MID
GR CONVERGENCE MID
Select with
then <ENTER>
<EXIT> to return.
MEMORY MANAGEMENT
COPY A BLOCK
DELETE A BLOCK
DELETE ALL BLOCKS
ALL SETTINGS TO MIDPOS
R & B CONVERGENCE MID
GR CONVERGENCE MID
Select with
then <ENTER>
<EXIT> to return.
ENTER will select the highlighted item.
EXIT returns to the Path Selection main
menu.
ADJUST returns to the Operational mode.
or
or
or
9-11