Connecting A S-Video Source - Barco VISION 701 MULTIMEDIA Owner's Manual

- use the control disk to high-
light 1.
- press ENTER to select the
highlighted source.

Connecting a S-Video source.

Separate Y-luma/C-chroma signals for higher quality playback of Super VHS
signals.
A line doubler is built in :
the default position of this line doubler is ON (active), the video input signal will
be displayed as a non interlaced image (= improved image stability).
To enable or to disable this line doubler function, enter the adjustment mode
and change the position of the ON/OFF toggle switch (see Picture tuning in
chapter 'Guided' adjustment mode or 'Random access' adjustment mode).
4-4
COMM PORT
REMOTE
RS232 IN RS232 OUT (800 peripherals)
VCR S-VHS
GENERAL ACCESS
5 6
3 4
1 2
Enter ADJUST
Select with
then <ENTER>.
<EXIT> to return
R G(S) B
S-VIDEO
S VIDEO
B-Y
R- Y Y(S)
Luma/Chroma
R5975238A BARCOVISION 701 MULTIMEDIA 200697
CONNECTIONS
SHARPNESS
TINT
COLOR
BRIGHTNESS
CONTRAST
,
or
Audio amplifier