Line Doubler; Enhanced Blue On/Off Adjustment - Barco VISION 701 MULTIMEDIA Owner's Manual

RANDOM ACCESS ADJUSTMENT MODE

Line Doubler

Line doubling is only possible for Video, S-Video or Component Video images on
standard line frequency.
To eliminate the video line patterns and to improve the image stability, the line
doubler has to be switched on. The line doubler is default set in the ON position
when starting up for the first time. The setting of the line doubler will be saved
together with the source number. Each time this source number is selected, the
last saved version will be loaded.
Highlight Line Doubler with the
control disk and press ENTER
to toggle between ON (active)
and OFF (non active).

Enhanced Blue On/Off Adjustment

Highlight ENHANCED BLUE by
pushing the control disk up or
down and press ENTER to tog-
gle between ON and OFF.(only
available when RGB signals
are connected)
When 'Enhanced Blue' is ON,
the blue color will be displayed
as cyan.
Note: Enhanced blue is only
used when an RGBS or RGsB
analog signal from a computer
is being displayed. Enhanced
blue is not recommended for
non computer generated im-
ages.
For displaying graphics, this
'Enhanced Blue' function could
falsify the color reproduction.
In this case, put Enhanced Blue
OFF.
R5975238A BARCOVISION 701 MULTIMEDIA 200697
PICTURE TUNING
COLOR BALANCE
SYNC : FAST
DECODING : IRE
LINE DOUBLER : ON
Select with
<ENTER> to accept
<EXIT> to return
ENTER will toggle Sync between FAST and
SLOW
EXIT will return to the Randam Access Ad-
justment menu.
PICTURE TUNING
WHITE BALANCE
SYNC : FAST
ENHANCED BLUE : ON
Select with
<ENTER> to accept
<EXIT> to return
ENTER will toggle Enhanced Blue be-
tween ON and OFF
EXIT will return to the Random access
main menu.
ADJUST returns to operational mode
or
or
8-9