R & B Convergence To Mid; Undo R & B Convergence To Mid - Barco R9002410 Owner's Manual

All settings to midposition
This item is password protected.
Highlight All settings to midposition using the
arrow keys and press ENTER to set all settings
to midposition.
A confirmation menu will be displayed first.
In this menu :
ENTER will set all settings to their midposition.
EXIT will cancel the operation.
Undo all settings to midposition
When 'All settings to midposition' is selected, this action can be cancelled by selecting
'Undo all settings to midposition' in the Memory Management menu. Press ENTER after
selecting this option.
An Undo is possible as long as the projector is on the same source (i.e. same
adjustment block) even when some adjustments like geometry or convergence are
readjusted. When Undo is selected, all settings are restored to their previous settings.
R & B CONVERGENCE MID
All convergence settings for red and blue are set to midposition.
Item is password protected.
Push the cursor key é or ê to highlight 'R & B Convergence Mid'.
Press ENTER to select.
A confirmation screen will be displayed first.
Press ENTER to confirm.
Press EXIT to cancel the procedure to set the convergence settings to their midposition.
UNDO R & B CONVERGENCE MID
When "R & B convergence mid" is selected, all convergence
settings are set to their midposition. With the undo, it is
possible to return to the previous settings as long as the
projector is playing on the same source (= same adjustment
block).
'Undo R & B convergence mid' is displayed in the Memory
management menu in stead off 'R & B convergence mid'
when this latter is pressed.
Push the cursor key é or ê to highlight 'Undo R & B
convergence mid'.
Press ENTER execute the undo function.
Again a confirmation screen will be displayed first.
Press ENTER to confirm.
Press EXIT to cancel the procedure to set the convergence settings to their midposition.
R5976101 BARCO CINE 5 ___________________________________________________________________________________
MEMORY MANAGEMENT
COPY A BLOCK
DELETE A BLOCK
DELETE ALL BLOCKS
ALL SETTINGS TO MID POS
R & B CONVERGENCE TO MID
or
Select with
then <ENTER>
<EXIT> to return
MEMORY MANAGEMENT
COPY A BLOCK
DELETE A BLOCK
DELETE ALL BLOCKS
ALL SELECTINGS TO MIDPOS
R & B CONVERGENCE TO MID
Select with
then <ENTER>
<EXIT> to return
MEMORY MANAGEMENT
COPY A BLOCK
DELETE A BLOCK
DELETE ALL BLOCKS
ALL SELECTINGS TO MIDPOS
UNDO R & B CONVERGENCE TO MID
or
Select with
then <ENTER>
<EXIT> to return
SET TO MIDPOSITION
All settings
in current blocks
will be overwritten !
<ENTER> to Confirm
<EXIT> to cancel
MEMORY MANAGEMENT
COPY A BLOCK
DELETE A BLOCK
DELETE ALL BLOCKS
UNDO MIDPOSITION
R & B CONVERGENCE TO MID
or
Select with
then <ENTER>
<EXIT> to return
CONVERGENCE
OFF
or
convergence setting
in current block
will be overwritten !
<ENTER> to Confirm
<EXIT> to cancel
CONVERGENCE OFF
convergence setting
in current block
will be overwritten !
<ENTER> to Confirm
<EXIT> to cancel
Service Mode
7-7