Change Language - Barco VISION 701 MULTIMEDIA Owner's Manual

SERVICE MODE
When the displayed password is cor-
rect, press ENTER to save.
If not correct, press EXIT to cancel
the saving.

Change Language

The 'Change Language' function of-
fers the possibility to change the
language of the screen menus to :
- English
- Spanish
- French
- German
Highlight 'Change Language' with
the control disk and press ENTER.
Push the control disk up or down to
select the desired language and
press ENTER to change the lan-
guage.
R5975228A BARCOVISION 701 MULTIMEDIA 200697
CHANGE PASSWORD
Password will be
reprogrammed as XXXX.
<ENTER> to confirm
<EXIT> to cancel
ENTER saves the entered password.
EXIT returns without saving.
PROJECTOR SET-UP
IDENTIFICATION
TOTAL RUN TIME
CHANGE PASSWORD
CHANGE LANGUAGE
CHANGE PROJECTOR ADDRESS
CHANGE BAUDRATE
POWER UP MODE : operating
BARCO LOGO
Select with
then <ENTER>
<EXIT> to return.
ENTER selects the Change language
menu.
EXIT returns to the Service menu.
LANGUAGE
ENGLISH
ESPAÑOL
FRANCAIS
DEUTSCH
Select with
then <ENTER>
<EXIT> to return.
or
or
9-7