Internal Cross Hatch Pattern; Random Access Adjustment Mode Selection Menu - Barco VISION 701 MULTIMEDIA Owner's Manual

Internal Cross Hatch Pattern

The Internal # pattern menu
will be displayed if the internal
cross hatch pattern has been
selected or if no source is con-
nected to the projector.
The table below lists the fac-
tory preset frequencies avail-
able.
Push the control disk up or
down to highlight the desired
cross hatch frequency and then
press ENTER.
kHz/Hz
15.6/50
15.7/60
31.2/50
31.5/60
31.2/50
31.5/60
33.7/60
15.8/60
21.8/60
31.5/70

Random access adjustment mode selection menu.

This is the main menu for the
Random Access adjustment
mode.
Through this menu, the follow-
ing adjustments and features
are accessible :
- Picture tuning
enhanced blue (only for
RGB)
sync slow/fast(video/s-
video)
color balance
- Geometry
- Convergence
- Color select
8-6
RANDOM ACCESS ADJUSTMENT MODE
ENTER continues to the Random Access
Adjustment Mode.
PAL/SECAM
EXIT returns to the Setup Pattern Selection
NTSC
menu.
EDTV
IDTV
HDTV EUREKA
HDTV ATV
HDTV HI-VISION
EGA 1
EGA 2
VGA 1,2
INTERNAL # PATTERN
kHz / Hz
15.6/50 PAL/SECAM
15.7/60 NTSC
31.2/50 EDTV
31.5/60 IDTV
31.2/50 HDTV EUREKA
31.5/60 HDTV ATV
33.7/60 HDTV HI-VISION
Select with
<ENTER> to accept
<EXIT> to return
35.8/87 VGA 4
48.5/60 SUPER VGA 1
44.2/70 SUPER VGA 2
61.0/76 SUPER VGA 3
22.2/60 MAC CLASSIC
RANDOM ACCESS
ADJUSTMENT MODE
PICTURE TUNING
GEOMETRY
CONVERGENCE
COLOR SELECT
Select with
<ENTER> to accept
<EXIT> to return
R5975238A BARCOVISION 701 MULTIMEDIA 200697
or
or