Deletion Of Blocks - Barco VISION 701 MULTIMEDIA Owner's Manual

To copy the settings of a closed
block to the block you are working on
(active block), use the control disk to
select a block.
All existing settings will be overwritten
with the new settings.
Press ENTER to copy the selected
block. A confirmation screen will be
displayed.
If you are certain you wish to copy
the contents of the selected block
into the active block, press ENTER.
EXIT cancels the copy procedure
and returns without copying the block.

Deletion of blocks

This item is password protected.
The delete function is used to clear
all data (settings) from an adjust-
ment block.
A delete can be given :
- block by block
or
- for all blocks.
9-12
COPY MODE
Nr. Src Fh Fv
1 1 15.6 50
2 3 31.2 60
3 - 15.6 50
4 2 31.5 50
5 - 33.7 60
6
7
8
Select with
<ENTER> to copy
<EXIT> to return
ENTER displays a confirmation screen.
EXIT returns to the Service Mode main
menu.
COPY BLOCK
Settings
in current block
wil be overwritten !
<ENTER> to confirm
<EXIT> to cancel
R5975228A BARCOVISION 701 MULTIMEDIA 200697
SERVICE MODE
inp conf.
video FC
RGB3S RT
intern FC
RGB3S FC
intern FC
Active block nr. 1
or