How To Cancel 'Set To Midposition; R & B Convergence Mid; What Can Be Done; How To Set Convergence To Midposition - Barco R9002384 Owner's Manual

Service Mode

How to cancel 'Set to midposition' ?

When "All settings to midpos" is selected, all settings are set to their midposition. To cancel this action :
1. Push the cursor key é or ê to highlight 'Undo all settings to midpos' (menu 1).
2. Press ENTER to cancel the set to midposition action.
MEMORY MANAGEMENT
COPY A BLOCK
DELETE A BLOCK
DELETE ALL BLOCKS
UNDO ALL SETTINGS TO MIDPOS
R & B CONVERGENCE MID
GR CONVERGENCE MID
Select with é or ê
then <ENTER>
<EXIT> to return.
menu 1
R & B convergence mid

What can be done ?

All convergence settings for red and blue are set to midposition.
Item is password protected.

How to set convergence to midposition :

1. Push the cursor key é or ê to highlight 'R & B Convergence Mid' (menu 1).
2. Press ENTER to select.
A confirmation screen will be displayed first (menu 2).
3. Press ENTER to confirm.
Press EXIT to cancel the procedure to set the convergence settings to their midposition.
MEMORY MANAGEMENT
COPY A BLOCK
DELETE A BLOCK
DELETE ALL BLOCKS
ALL SETTINGS TO MIDPOS
R & B CONVERGENCE MID
GR CONVERGENCE MID
Select with é or ê
then <ENTER>
<EXIT> to return.
menu 1
Undo R & B convergence mid
What can be done ?
When "R & B convergence mid" is selected, all convergence settings are set to their midposition. With the undo, it is possible to return
to the previous settings as long as the projector is playing on the same source (= same adjustment block).
'Undo R & B convergence mid' is displayed in the Memory management menu in stead off 'R & B convergence mid' when this latter
is pressed.

How to Undo ?

1. Push the cursor key é or ê to highlight 'Undo R & B convergence mid' (menu 1).
2. Press ENTER execute the undo function.
MEMORY MANAGEMENT
COPY A BLOCK
DELETE A BLOCK
DELETE ALL BLOCKS
ALL SETTINGS TO MIDPOS
UNDO R & B CONVERGENCE MID
GR CONVERGENCE MID
Select with é or ê
then <ENTER>
<EXIT> to return.
menu 1
8-10
R & B CONVERGENCE MID
Convergence settings
in current block
will be overwritten !
<ENTER> to confirm
<EXIT> to cancel
menu 2
5976197 BARCOCINE 7 10012001