Barco VISION 701 MULTIMEDIA Owner's Manual page 122

INPUT 01
Fh= 15.6 kHz
Fv= 050 Hz
SOURCE 01
enter
password
x x x x
text on
text off
PROJECTOR
ADDRESS :
003
WARNING :
input not
available
10-2
MESSAGES, WARNINGS AND FAILURES
When selecting a new source, information about this
source will be displayed on the screen. Source number,
horizontal and vertical frequencies of the displayed
source.
Announcement of the selected source.
Message to enter your password. Password contains 4
digits.
These messages will be displayed on the screen when
pushing the TEXT key.
Text ON : the 'bar scale indication' will be enabled
during the change of an analog control in the 'opera-
tional mode' + all warnings and failures will be dis-
played.
Text OFF : the 'bar scale indication' will be disabled
during the change of an analog control in the 'operational
mode' + all warnings and failures will not be displayed.
Indication of the projector address when activating the
'ADDRESS' button on the RCU with a pencil or other
small object.
When using the projector with the RCVDS, this warning
will be displayed when selecting an input slot of an
RCVDS where the input board is missing.
R5975228A BARCOVISION 701 MULTIMEDIA 200697