Horizontal Size Adjustment - Barco VISION 701 MULTIMEDIA Owner's Manual

Horizontal Size Adjustment

Push the control disk up or
down to highlight H SIZE on
the Geometry menu and then
press ENTER .
Adjust the horizontal size by
pushing the control stick to the
right or to the left until the exact
image width is obtained.
Note :
- if the internal # pattern was
selected, this pattern re-
mains on the screen.
- if the genlocked pattern was
H size too
large
H size too
small
8-20
RANDOM ACCESS ADJUSTMENT MODE
Ideal image size
GEOMETRY
H PHASE
RASTER SHIFT
LEFT - RIGHT (E-W)
TOP - BOTTOM (N-S)
H SIZE
V LINEARITY
V SIZE
BLANKING
Select with
then <ENTER>
<EXIT> to return
ENTER will select horizontal size adjust-
ment
EXIT returns to random access adjustment
mode menu.
ADJUST returns to operational mode
selected, the external source will be
displayed.
A bar scale and a number indicator give
a visual indication of the horizontal size
adjustment.
Hint : In order to avoid loss of resolution
in the projected image and to ensure
maximum CRT longevity, do not use an
excessively small horizontal size set-
ting.
EXIT will return to Geometry
R5975238A BARCOVISION 701 MULTIMEDIA 200697
or
H SIZE
70