Table of Contents
Advertisement
Service Mode
R & B convergence mid
Item is password protected.
Highlight 'R & B convergence mid' with the control disk and press
ENTER to set all convergence settings to their midposition. A
confirmation screen will be displayed first.
ENTER sets the convergence settings to their midposition. EXIT
cancels the procedure to set the convergence settings to their
midposition.
Undo R & B convergence mid
When "R & B convergence mid" is selected, all convergence settings
are set to their midposition. To cancel this action, select 'Undo R &
B convergence mid' by pushing the control disk up or down and press
ENTER. 'Undo R & B convergence mid' is displayed in the Memory
management menu in stead off 'R & B convergence mid' when this
latter is pressed.
An undo is possible as long as the projector is playing on the same
source (= same adjustment block) even when some adjustments are
already readjusted. When undo is presssed all settings are reset to
the previous settings.
Green convergence mid
Only available when the projector is equipped with green conver-
gence adjustmentes.
Highlight 'Gr convergence mid' by pushing the control disk up or
down and press ENTER to switch off the green convergence.
Undo green convergence mid
Only available when the projector is equipped with green conver-
gence adjustmentes.
The item 'Undo green convergence mid' will automatically be dis-
played when the green convergence is switched to midposition.
Press ENTER to switch on the green convergence.
7 - 8
MEMORY MANAGEMENT
COPY A BLOCK
DELETE A BLOCK
DELETE ALL BLOCKS
ALL SETTINGS TO MIDPOS
R & B CONVERGENCE MID
GR CONVERGENCE MID
Select with
or
then <ENTER>
<EXIT> to return.
R & B CONVERGENCE MID
Convergence settings
in current block
will be overwritten !
<ENTER> to confirm
<EXIT> to cancel
MEMORY MANAGEMENT
COPY A BLOCK
DELETE A BLOCK
DELETE ALL BLOCKS
ALL SETTINGS TO MIDPOS
UNDO R & B CONVERGENCE MID
GR CONVERGENCE MID
Select with
or
then <ENTER>
<EXIT> to return.
MEMORY MANAGEMENT
COPY A BLOCK
DELETE A BLOCK
DELETE ALL BLOCKS
ALL SETTINGS TO MIDPOS
R & B CONVERGENCE MID
GR CONVERGENCE MID
Select with
or
then <ENTER>
<EXIT> to return.
MEMORY MANAGEMENT
COPY A BLOCK
DELETE A BLOCK
DELETE ALL BLOCKS
ALL SETTINGS TO MIDPOS
R & B CONVERGENCE MID
UNDO GR CONVERGENCE MID
Select with
or
then <ENTER>
<EXIT> to return.
5975977A BARCODATA 708 280597
Advertisement
Table of Contents
