Geometry Adjustments - Barco VISION 701 MULTIMEDIA Owner's Manual

RANDOM ACCESS ADJUSTMENT MODE

Geometry Adjustments

The geometry adjustments have to be done only on the green image. These
adjustments are automatically implemented for the other color images : Left-right
(EW) and Top-Bottom corrections, blanking, Horizontal amplitude, vertical
amplitude, vertical linearity and Horizontal phase.
Highlight GEOMETRY by
pushing the control disk up or
down and press ENTER to dis-
play the geometry menu.
Within the geometry adjust
menu, the following adjust-
ments are available :
- horizontal phase (not for in-
ternal # pattern).
- raster shift
- left-right corrections
- top-bottom corrections
- horizontal size
- vertical linearity
- vertical size
- blanking
The convergence corrections
are disabled during geometry
corrections. The blanking cor-
rections are only enabled dur-
ing the blanking adjustments.
R5975238A BARCOVISION 701 MULTIMEDIA 200697
RANDOM ACCESS
ADJUSTMENT MODE
PICTURE TUNING
GEOMETRY
CONVERGENCE
COLOR SELECT
Select with
<ENTER> to accept
<EXIT> to return
ENTER will display Geometry menu
EXIT will return to Internal Crosshatch Se-
lection or Setup Pattern Selection Menu
ADJUST returns to operational mode
GEOMETRY
H PHASE
RASTER SHIFT
LEFT - RIGHT (E-W)
TOP - BOTTOM (N-S)
H SIZE
V LINEARITY
V SIZE
BLANKING
Select with
then <ENTER>
<EXIT> to return
ENTER will display the selected option
EXIT will return to Random Access Adjust-
ment Mode main menu
ADJUST returns to operational mode
or
or
8-11