Internal Cross Hatch Pattern - Barco VISION 701 MULTIMEDIA Owner's Manual

GUIDED ADJUSTMENT MODE

Internal Cross Hatch Pattern

The Internal # pattern menu
will be displayed if the internal
cross hatch pattern has been
selected or if no source is con-
nected to the projector.
The table below lists the fac-
tory preset frequencies avail-
able.
Push the control disk up or
down to highlight the desired
cross hatch frequency and then
press ENTER.
kHz/Hz
15.6/50
15.7/60
31.2/50
31.5/60
31.2/50
31.5/60
33.7/60
15.8/60
21.8/60
31.5/70
35.5/87
Note: Before continuing, in-
sure that the lenses are prop-
erly focused and that the CRT
projection angle is correctly ad-
justed. If any misalignment is
noticed, consult a qualified
service technician.
R5975238A BARCOVISION 701 MULTIMEDIA 200697
ENTER continues to Guided Adjustment
Mode.
EXIT returns to Setup Pattern Selection.
PAL/SECAM
NTSC
EDTV
IDTV
HDTV EUREKA
HDTV ATV
HDTV HI-VISION
EGA 1
EGA 2
VGA 1,2
VGA 4
ENTER continues with the Picture Tuning
EXIT returns to Setup Pattern Selection or
Internal # Pattern Selection
ADJUST returns to operational mode
INTERNAL # PATTERN
kHz / Hz
15.6/50 PAL/SECAM
15.7/60 NTSC
31.2/50 EDTV
31.5/60 IDTV
31.2/50 HDTV EUREKA
31.5/60 HDTV ATV
33.7/60 HDTV HI-VISION
Select with or
<ENTER> to accept
<EXIT> to return
48.5/60 SUPER VGA 1
44.2/70 SUPER VGA 2
61.0/76 SUPER VGA 3
22.2/60 MAC CLASSIC
GUIDED ADJUSTMENT MODE
INSURE THAT
THE PROJECTOR HAS BEEN
INSTALLED CORRECTLY,
AND THAT THE LENSES/CRTS
HAVE BEEN PROPERLY
FOCUSED AND ALIGNED.
ALL ADJUSTMENTS ARE
MADE WITH THE ARROW KEYS
<ENTER> to continue
<EXIT> to return
7-5