Common Settings - Barco VISION 701 MULTIMEDIA Owner's Manual

SERVICE MODE
Undo green convergence mid
Only available when the projector
is equipped with green conver-
gence adjustmentes.
The item 'Undo green convergence
mid' will automatically be displayed
when the green convergence is
switched to midposition.
Press ENTER to switch on the green
convergence.

Common Settings

Highlight 'Common settings' by push-
ing the control disk up or down and
press ENTER to display the com-
mon settings menu.
Within the common settings menu,
the following items can be set up or
executed :
- G2 adjustment
- CRT run in cycle
- Projector warm up
R5975228A BARCOVISION 701 MULTIMEDIA 200697
MEMORY MANAGEMENT
COPY A BLOCK
DELETE A BLOCK
DELETE ALL BLOCKS
ALL SETTINGS TO MIDPOS
R & B CONVERGENCE MID
UNDO GR CONVERGENCE MID
Select with or
then <ENTER>
<EXIT> to return.
SERVICE MODE
PROJECTOR SET-UP
MEMORY MANAGEMENT
COMMON SETTINGS
I2C DIAGNOSTICS
Select with or
then <ENTER>
<EXIT> to return.
COMMON SETTINGS
G2 ADJUSTMENT
CRT RUN IN CYCLE
PROJECTOR WARM UP
Select with or
then <ENTER>
<EXIT> to return.
9-17