Front Panel Terminology - Barco VISION 701 MULTIMEDIA Owner's Manual

LOCATION AND FUNCTION OF CONTROLS
VIDEO IN (Composite video, 1x BNC connector): allows a video tape
7
recorder, video camera, color receiver/monitor, etc. having video line
output to be connected to the projector.
S-VIDEO IN: Separated Y/C (luma-chroma) signal inputs and outputs
8
for higher quality playback of Super VHS signals (4-pin S-VIDEO
connector).

FRONT PANEL TERMINOLOGY

AUTODIAGNOSIS DISPLAY
1
LED indication for service purposes.
POWER (MAINS) SWITCH : press the switch to turn the projector ON.
2
Depending on the hardware set-up of the projector during installation,
the projector switches to 'standby' or to 'operational mode'. If in
standby, the standby led in the autodiagnosisdisplay lights up.
POWER (MAINS) INPUT: Connect the supplied ac power (mains) cord
3
here and to wall the outlet.
IR SENSOR
4
receiver for control signals transmitted from the RCU700.
R5975238A BARCOVISION 701 MULTIMEDIA 200697
1
2
3 4
2-3