Undo R & B Convergence Mid - Barco R9002328 Owner's Manual

ENTER sets the convergence set-
tings to their midposition. EXIT can-
cels the procedure to set the conver-
gence settings to their midposition.
Undo R & B convergence mid
When "R & B convergence mid" is
selected, all convergence settings
are set to their midposition. To cancel
this action, select 'Undo R & B conver-
gence mid' by pushing the control
disc up or down and press ENTER.
'Undo R & B convergence mid' is
displayed in the Memory manage-
ment menu in stead off 'R & B conver-
gence mid' when this latter is pressed.
An undo is possible as long as the
projector is playing on the same
source (= same adjustment block)
even when some adjustments are
already readjusted. When undo is
presssed all settings are reset to the
previous settings.
Green convergence mid
Only available when the projector is
equipped with green convergence
adjustments.
Highlight 'Gr convergence mid' by push-
ing the control disc up or down and
press ENTER to switch off the green
convergence.
9-16
All manuals and user guides at all-guides.com
!
MEMORY MANAGEMENT
UNDO R & B CONVERGENCE MID
ê é
MEMORY MANAGEMENT
GR CONVERGENCE MID
ê é
R5975059A BARCOVISION 708 200498