Connecting A Component Source - Barco VISION 701 MULTIMEDIA Owner's Manual

Connecting a Component source.

(R-Y)Y(B-Y) analog input terminals with sync input or with sync on the luminance
(Y) input. The projector detects automatically where the sync signal is located.
Line doubling is possible for component video input sources on standard line
frequency.
A line doubler is built in :
the default position of this line doubler is ON (active), the component video input
signal will be displayed as a non interlaced image (= improved image stability).
To enable or to disable this line doubler function, enter the adjustment mode and
change the position of the ON/OFF toggle switch (see Picture tuning in chapter
'Guided' adjustment mode or 'Random access' adjustment mode).
(R-Y)Y(B-Y)S or(R-Y)Ys(B-Y) input selection
a. Press digit button 5 on the RCU or
b. With the local keypad :
(to gain access to the local keypad, see 'Local keypad' in chapter 'Location and
function of controls'.)
- Press ADJUST key, the General access menu is displayed on the screen.
4-8
COMM PORT
(800 peripherals) REMOTE
RS232 OUT
RS232 IN
Professional VCR
R G(S) B
S-VIDEO
S VIDEO
R- Y Y(S) B-Y
R5975238A BARCOVISION 701 MULTIMEDIA 200697
CONNECTIONS
Audio amplifier