Top Bow Adjustment; Bottom Keystone Adjustment; Bottom Bow Adjustment - Barco VISION 701 MULTIMEDIA Owner's Manual

Top Bow Adjustment

The top bow function corrects
for curvature occurring in the
upper part of the image.
Adjust the bow of the horizon-
tal lines in the upper side of the
image by pushing the control
disk up or down until these
lines are straight.
A bar scale and a number indi-
cator below indicate the
amount of adjustment.

Bottom Keystone Adjustment

The bottom keystone function
corrects for keystone geometry
distortion of the horizontal lines
in the lower part of the image.
Adjust the horizontal lines in
the lower part of the image by
pushing the control disk up or
down until these lines are
straight.
A bar scale and a number indi-
cator (between 0 and 100) will
give a visual indication of the
adjustment.

Bottom Bow Adjustment

The bottom bow function cor-
rects for curvature occurring
in the lower part of the image.
Push the control disk up or
down to adjust the bottom bow
in the lower part of the setup
pattern. Adjust until the hori-
zontal lines are straight.
A bar scale and a number
indicator (between 0 and 100
%) give a visual indication of
the adjustment.
7-16
GUIDED ADJUSTMENT MODE
R5975238A BARCOVISION 701 MULTIMEDIA 200797
Correct by pushing
the control disk up.
Correct by pushing
the control disk
down.
Correct by pushing
the control disk up.
Correct by pushing
the control disk
down.
Correct by pushing
the control disk up.
Correct by pushing
the control disk
down.