Connecting A Rgb Analog Source With Composite Sync - Barco VISION 701 MULTIMEDIA Owner's Manual

CONNECTIONS
S-Video input selection
a. Press digit button 2 on the RCU or
b. with the local keypad :
(to gain access to the local keypad, see 'Local keypad' in chapter 'Location and
function of controls'.)
- Press ADJUST key, the General access menu is displayed on the screen.
- Use the control disk to
highlight 2.
- Press ENTER to select
the highlighted source.

Connecting a RGB Analog source with composite sync.

RGB analog input terminals with composite sync input or with sync on green. The
projector detects automatically where the sync signal is located.
Always use an interface when a computer and local monitor have to be connected
to the projector. Examples of interfaces which can be applied :
Universal analog interface
RGB 120 MHz Analog Interface
Multifunctional Analog Interface Kit
(MAGIK)
VGA interface
MAC interface
R5975238A BARCOVISION 701 MULTIMEDIA 200697
GENERAL ACCESS
5 6
BRIGHTNESS
3 4
1 2
Enter ADJUST
Select with ,
or
then <ENTER>.
<EXIT> to return
R9826100
R9826570 (230V)
R9828120 (230V)
R9828129 (120V)
R9828070 (230V)
R9828079 (120V)
R9828050 (230V)
R9828059 (120V)
SHARPNESS
TINT
COLOR
CONTRAST
4-5