Connecting A Composite Video Source - Barco VISION 701 MULTIMEDIA Owner's Manual

CONNECTIONS

Connecting a Composite Video source.

Composite video signals from a VCR, OFF air signal decoder, etc..
A line doubler is built in :
the default position of this line doubler is ON (active), the video input signal will
be displayed as a non interlaced image (= improved image stability).
To enable or to disable this line doubler function, enter the adjustment mode
and change the position of the ON/OFF toggle switch (see Picture tuning in
chapter 'Guided' adjustment mode or 'Random access' adjustment mode).
Video input selection :
a. Press digit button 1 on the RCU or
b. with the local keypad :
(to gain access to the local keypad, see 'Local keypad' in chapter 'Location and
function of controls'.)
- press ADJUST key, the General access menu is displayed on the screen.
R5975238A BARCOVISION 701 MULTIMEDIA 200697
COMM PORT
REMOTE
RS232 OUT
RS232 IN
(800 peripherals)
TV tuner, e.g. TVDM40 stereo
VCR
R G(S) B
S-VIDEO
S
VIDEO
B-Y
R- Y Y(S)
Composite
video
Audio amplifier
4-3