Line Doubler (Option); Enhanced Blue On/Off - Barco VISION 701 MULTIMEDIA Owner's Manual

GUIDED ADJUSTMENT MODE
Highlight Line Doubler by push-
ing the control disk up or down
and press ENTER to toggle
between ON (active) and OFF
(non active)

Enhanced blue ON/OFF

Highlight Enhanced Blue by
pushing the control disk up or
down and press ENTER to
toggle between ON and OFF
(only available when RGB
analog signals are connected
to the projector).
When Enhanced Blue is ON,
the blue color will be displayed
as cyan.
Note : Enhanced blue is only
used when an RGBS or RGsB
analog signal from a computer
is being displayed. Enhanced
blue is not recommended for
non computer generated im-
ages.
For displaying graphics, this
Enhanced Blue function could
falsify the color reproduction.
In this case, put Enhanced
Blue OFF
R5975238A BARCOVISION 701 MULTIMEDIA 200697
PICTURE TUNING
SYNC : FAST
CHROMA DELAY : PAL
LINE DOUBLER : ON
CONTINUE
Select with
<ENTER> to accept
<EXIT> to return
ENTER toggles beween ON and OFF.
EXIT returns to the Guided Adjustment Menu.
PICTURE TUNING
SYNC : FAST
ENHANCED BLUE : ON
CONTINUE
Select with
<ENTER> to accept
<EXIT> to return
ENTER will toggle Enhanced Blue between
ON and OFF.
EXIT will return to the Guided Adjustment
menu.
or
or
7-7