Barco VISION 701 MULTIMEDIA Owner's Manual page 135

APPENDIX B : ORBITING
Adjustment procedure multiple projector installations :
Important : to allow corrections in the deviation alignments of the slave projectors,
never adjust the deviations of the master projector to its maximum.
Default setting of the Master projector see 'Stand alone projector'.
Highlight 'ADJUST DEVIATION'
with the control disk and press
ENTER.
When adjusting the horizontal and
the vertical deviation, the picture
moves in the corresponding direc-
tion, allowing the set up of the
deviation without orbiting opera-
tion.
Push the control disk to the left
(right) or up (down) to toggle be-
tween Hor. and Vert. deviation
adjustment.
Adjust horizontal deviation by pushing
the control disk to the left or to the right
Adjust vertical deviation by pushing
the control disk up or down
R5975238A BARCOVISION 701 MULTIMEDIA 200697
SLAVE ORBITING
CHANGE TO MASTER
ADJUST DEVIATION
SELECT WITH
THEN <ENTER>
DEVIATION ADJUST :
VERTICAL WITH
HORIZONTAL WITH
<EXIT> to return
ENTER will select the Orbiting Adjust-
ment menu.
EXIT returns to the Path Selection menu.
OR
OR
OR
HORIZONTAL
ORBIT AMPL
70
VERTICAL
ORBIT AMPL
70
B-5