Deletion Of All Blocks; All Settings To Midposition - Barco VISION 701 MULTIMEDIA Owner's Manual

Deletion of all blocks

Highlight 'delete all blocks' with the
control disk and press ENTER.
If you are certain you wish to delete
all blocks, press ENTER to confirm,
otherwise press EXIT to return.
Once ENTER is pressed, all block
headers and adjustment settings are
permanently removed and cannot be
restored.

All settings to midposition

Item is password protected.
Highlight 'All settings to midposition'
with the control disk and press EN-
TER to set all settings to their
midposition.
A confirmation menu will be displayed
first.
9-14
MEMORY MANAGEMENT
COPY A BLOCK
DELETE A BLOCK
DELETE ALL BLOCKS
ALL SETTINGS TO MIDPOS
R & B CONVERGENCE MID
GR CONVERGENCE MID
Select with
then <ENTER>
<EXIT> to return.
ENTER gives a confirmation message
before deleting.
EXIT returns to the Path Selection
main menu.
DELETE ALL BLOCKS
All 32 blocks
will be deleted !
<ENTER> to confirm
<EXIT> to cancel
MEMORY MANAGEMENT
COPY A BLOCK
DELETE A BLOCK
DELETE ALL BLOCKS
ALL SETTINGS TO MIDPOS
R & B CONVERGENCE MID
GR CONVERGENCE MID
Select with
then <ENTER>
<EXIT> to return.
ENTER displays a Confirmation screen.
EXIT returns to the Service menu.
R5975228A BARCOVISION 701 MULTIMEDIA 200697
SERVICE MODE
or
or