Exiting The Configuration Menu; Reset Separator Roll And Pick Assembly Counter; Usb Scan To Local; Black Only Mode - Lexmark X792 Service Manual

Hide thumbs Also See for X792:
Table of Contents

Advertisement

7562
Configuration Menu
ADF Edge Erase
FB Edge Erase
Scanner Manual
Registration
Disable Scanner
Paper Prompts
Envelope Prompts
Action for Prompts
Jobs On Disk
Disk Encryption
Wipe Disk
Font Sharpening
Require Standby
UI Automation
Key Repeat Initial
Delay
Key Repeat Rate
Clear Custom Status
USB Speed
Exit Config Menu

Exiting the Configuration Menu

Select EXIT Config Menu to exit the Configuration Menu and return to normal mode.

Reset Separator Roll and Pick Assembly Counter

Use this setting to reset the value of the separator roll and pick assembly maintenance counter to zero (0) after
you replace them.

USB Scan to Local

When set to Off, this setting tells the USB device driver to enumerate as a USB Simple device. When this is set
to on, USB device driver enumerates as a USB Composite device (multiple interfaces).

Black Only Mode

When this setting is set to On the printer prints only grayscale printing. The default is Off. The result is similar to
setting Print Mode to Black Only.
Note: This setting appears only when the PJL Password Environment variable is set to 0.

Print Quality Pages

The Print Quality Test consists of five pages. Pages one and two contain a mixture of graphics and text. The
remainder of the pages only contain graphics. Use this test to identify print quality problems. The Test Pages
must be printed on A4, Legal, or Letter paper.
Go to
"Print tests" on appendix page A-1
3-30
Service Manual
See
"ADF Edge Erase" on page
See
"FB Edge Erase" on page
See
"Scanner Manual Registration" on page
See
"Disable Scanner" on page
See
"Paper Prompts" on page
See
"Envelope Prompts" on page
See
"Action for Prompts" on page
See
"Jobs On Disk" on page
See
"Disk Encryption" on page
See
"Wipe Disk" on page
3-34.
See
"Font Sharpening" on page
See
"Require Standby" on page
See
"UI Automation" on page
See
"Key Repeat Initial Delay" on page
See
"Key Repeat Rate" on page
See
"Clear Custom Status" on page
See
"USB Speed" on page
for representative samples of the pages.
3-33.
3-33.
3-33.
3-33.
3-33.
3-34.
3-34.
3-34.
3-34.
3-34.
3-34.
3-35.
3-35.
3-35.
3-35.
3-35.
Previous
Next
Go Back

Advertisement

Table of Contents
loading

Table of Contents