Media Missing Jam Service Check - Lexmark X792 Service Manual

280.06—Media missing jam service check
Step
1 1. Remove all documents from the ADF.
2. Place an undamaged document in the
ADF, and perform a ADF test.
Does the error remain?
2 Check the sensor (ADF document set) for
proper operation.
1. Enter the Diagnostics Menu.
2. Touch SCANNER TESTS.
3. Touch Sensor Tests.
4. Touch TBD.
Does the display on the operator panel,
change every time the sensing area of the
above sensor is interrupted or blocked?
3 Check the sensor (2nd scan) for proper
connection.
Is the above component properly
connected?
4 Place an undamaged document in the ADF,
and perform an ADF test.
Does the error remain?
5 Perform a print test using the ADF.
Does the problem persists?
Check Yes
Go to step 2.
Go to step 6.
Replace the sensor (ADF
document set). See
"Sensor (ADF document
set) removal" on
page 4-206.
Replace the ADF controller
card assembly. See "ADF
controller card removal"
on page 4-174.
Go to step 5.
Contact your next level of
support.
7562
No
Problem solved.
Go to step 5.
Replace the connection.
Problem solved.
Problem solved.
2-125
Diagnostic information
Previous
Next
Go Back