Lexmark X792 Service Manual page 297

5. Determine if the printer meets the skew specifications based on the values listed on the table.
Skew Specification
Letter
A4
Legal
6. If the printer does not meet the skew specifications, then go to
the base printer registration.
7. If the printer meets the skew specifications, then measure the scanner skew and determine if it meets the
skew specifications.
Scanner paper tray guides
In the scanner, the only parts that align the paper are the tray guides (A). The media is free to skew if the guides
are too tight or too loose.
(L2-L1) (R2-R1)
<1.4 mm <1.4 mm
<1.5 mm <1.5 mm
<1.8 mm <1.8 mm
(T2-T1) (B2-B1)
<1 mm <1 mm
"REGISTRATION" on page 3-11
A
Diagnostic aids
7562
Previous
Next
Go Back
to adjust
3-57