High-voltage power supply (HVPS) board removal
See
"Front" on page 7-7
1.
Remove the ITU block assembly. See
2.
Remove the rear cover. See
3.
Remove the two screws (A) to remove the RIP card shield from the system board.
4.
Disconnect the HVPS cable (B) from the system board.
for the part number.
"ITU block assembly removal" on page
"Rear cover removal" on page
4-23.
A (88A0232)
B
7562
4-75.
4-67
Repair information
Previous
Next
Go Back