Configuration Menu (Config Menu); Entering Configuration Menu; Go Back; Available Menus - Lexmark W850n Service Manual

Configuration menu (CONFIG MENU)

Entering Configuration Menu

1.
Turn off the printer.
2.
Press and hold
3.
Turn on the printer.
Release the buttons when Performing Self Test displays.
4.
The message CONFIG MENU displays on the top line of the operator panel.

Available menus

Configuration Menu
Maint Cnt Value
Reset Maint Cnt
REGISTRATION
Top Margin
Tray 1 Left Mar
Tray 2 Left Mar
Tray 3 Left Mar (if installed)
Tray 4 Left Mar (if installed)
Tray 5 Left Mar (if installed)
Quick Test
Prt Quality Pgs
SIZE SENSING
Tray 1 Sensing
Tray 2 Sensing
Tray 3 Sensing (if installed)
Tray 4 Sensing (if installed)
Tray 5 Sensing (if installed)
Statement/A5
Executive/B5
Panel Menus
PPDS Emulation
Demo Mode
Factory Defaults
Energy Conserve
EVENT LOG (print log only)
Paper Prompts
Env Prompts
Jobs On Disk (if hard disk is
installed)
Disk Encryption (only if hard disk
is installed and feature is set up)
Font Sharpening
Short-edge Printing
and .
See "Maintenance page count (Maint Cnt Value)" on page
See "Maintenance page counter reset (Reset Maint Cnt)" on page
See "REGISTRATION" on page
See "Top Margin" on page
See "Tray 1–5 Left Margin" on page
See "Quick Test" on page
See "Print quality pages (Prt Quality Pgs)" on page
See "SIZE SENSING" on page
See "Statement/A5" on page
See "Executive/B5" on page
See "Panel Menus" on page
See "PPDS Emulation" on page
See "Demo Mode" on page
See "Factory Defaults" on page
See "Energy Conserve" on page
See "EVENT LOG" on page
See "Paper Prompts" on page
See "Env Prompts" on page
See "Jobs On Disk" on page
See "Disk Encryption" on page
See "Font Sharpening" on page
See "Short Edge Printing" on page
3-21.
3-21.
3-21.
3-22.
3-22.
3-23.
3-23.
3-23.
3-23.
3-24.
3-24.
3-24.
3-24.
3-24.
3-24.
3-25.
3-25.
3-25.
3-25.
3-25.
Diagnostic aids
4024-110
Previous
Next

Go Back

3-20.
3-20.
3-19