Media tray missing (2000-sheet input option) service check
Step
Questions / actions
1
Does the 2000-sheet high-capacity feeder
media tray assembly close properly?
2
Check the media size actuator.
Is the media actuator not deformed or not
damaged?
3
Check each of the tact switch at the back of
the controller card if it ticks when pressed.
Is the tact switch not damaged?
4
Check if the pick arm assembly is not hanging
down.
Is the pick arm hanging?
Yes
Go to step 2.
Go to step 3.
Go to step 4.
Go to step 5.
7562
No
Go to step 4.
Replace the 2000-sheet
high-capacity feeder
drawer assembly.
Replace the 2000-sheet
high-capacity feeder
controller card assembly.
See
"2000-sheet high-
capacity feeder controller
card assembly removal"
on page
4-260.
Go to step 6.
2-187
Diagnostic information
Previous
Next
Go Back