Finisher Or Stacker Led Sensor Cover Removal - Lexmark X792 Service Manual

7562
3.
Using a flat-blade screwdriver, pry up to disengage the tabs on the right, left, and top sides of the cover.
4.
Remove the left cover.

Finisher or stacker LED sensor cover removal

1.
Remove the option from the printer.
2.
Remove the standard output bin LED lens. See
removal" on page
3.
Remove the sensor (finisher media bin present). See
present) removal" on page
4-338
Service Manual
4-343.
4-350.
"Finisher or stacker output bin LED and LED lens
"Finisher or stacker sensor (finisher bin media
Previous
Next
Go Back