Data Security Notice; Tools Required For Service - Lexmark X792 Service Manual

Hide thumbs Also See for X792:

Table of Contents

Data security notice

This printer contains various types of memory that are capable of storing device and network settings,

information from embedded solutions, and user data. The types of memory, along with the types of data stored

by each, are described below.

Volatile memory—This device utilizes standard Random Access Memory (RAM) to temporarily buffer user

data during simple print and copy jobs.

Non-volatile memory—This device may utilize two forms of non-volatile memory: EEPROM and NAND

(flash memory). Both types are used to store the operating system, device settings, network information,

scanner and bookmark settings, and embedded solutions.

Hard disk memory—Some devices have a hard disk drive installed. The printer hard disk is designed for

device-specific functionality and cannot be used for long term storage for data that is not print-related. The

hard disk does not provide the capability for users to extract information, create folders, create disk or

network file shares, or transfer FTP information directly from a client device. The hard disk can retain

buffered user data from complex print jobs, as well as form data and font data.

To erase volatile memory, turn off the printer.

To erase non-volatile memory, see the menu item under

To erase the printer hard disk, see the menu item under

The printer control panel and RIP/controller board contain NVRAM. After removing the old part, it must be

returned to your next level of support.

Flat-blade screwdriver

#1 Phillips screwdriver, magnetic

#2 Phillips screwdriver, magnetic

#2 Phillips screwdriver, magnetic short-blade

Needlenose pliers

Diagonal side cutters

Feeler gauges

Analog or digital multimeter

Parallel wrap plug 1319128

Twinax/serial debug cable 1381963

Coax/serial debug cable 1381964

"Configuration Menu" on page 3-29

pertaining to

pertaining to this.

General information