Finisher Or Stacker Tamper Drive Belt Removal - Lexmark X792 Service Manual

7562

Finisher or stacker tamper drive belt removal

See "Finisher/High-capacity output stacker assembly (continued)" on page 7-39
1.
Remove the option from the printer.
2.
Remove the tamper drive motor from the belt you need to replace. See
motor assembly removal" on page
3.
Pull the belt out the tamper belt holder and remove the belt from the pulley.
4-356
Service Manual
4-357.
for the part number.
"Finisher or stacker tamper drive
Previous
Next
Go Back