Finisher Or Stacker Sensor (Bin-Full Send) Removal - Lexmark X792 Service Manual

Finisher or stacker sensor (bin-full send) removal

See "Finisher /High-capacity output stacker assembly" on page 7-37
1.
Remove the option from the printer.
2.
Remove the finisher or stacker controller card assembly. See
assembly removal" on page
3.
Remove the two screws (A) securing the sensor.
4.
Disconnect the cable, and remove the sensor.
4-335.
for the part number.
"Finisher or stacker controller card
Repair information
7562
Previous
Next
Go Back
4-349