Lexmark X792 Service Manual page 211

Step Questions / actions
2 Open the system board shield. Check the
cable in connector JDP1 for proper
connection to the system card.
Is the cable properly connected?
3 Check the cable for damage.
Is the cable damaged?
Yes
Go step 3.
Replace the duplexer
cable.
To access the cable, see
"LVPS exit duct removal"
on page 4-84 and
"Left cover removal" on
page 4-16.
7562
No
Reseat the cable.
Go step 4.
2-171
Diagnostic information
Previous
Next
Go Back