7562
Redrive bubble sensor service check
Step
Questions / actions
1
Open the left access door, and remove the
fuser. Check the redrive bubble sensor flag
for damage.
Is the redrive bubble sensor flag
damaged?
2
Turn the printer off, and open the system
board shield. Check the cable in connector
JRDR1 for proper connection to the system
card.
Is the cable properly connected?
3
Replace the paper path redrive assembly.
See
"Paper path redrive assembly with
sensors removal" on page
Does the error reoccur?
2-192
Service Manual
Replace the paper path
redrive assembly. See
"Paper path redrive
assembly with sensors
removal" on page
Go to step 3.
Replace the system board.
See
"System board
4-116.
removal" on page
Yes
Go to step 2.
4-116.
Reseat the cable.
Problem solved.
4-149.
Previous
No
Next
Go Back