7562
ADF turn guide removal
See
"ADF covers" on page 7-23
1.
Remove the ADF pinch roll assembly. See
2.
Remove the ADF feed/pick roll assembly. See
3.
Remove the two screws (A) from the front of the ADF unit assembly.
4.
Using a flat-blade screwdriver, unfasten the three hooks securing the separator guide to the turn guide,
starting with the center hook.
5.
Pivot the turn guide out from the front side, giving room to dislodge the pins from the rear.
6.
Remove the ADF turn guide.
4-202
Service Manual
for the part number.
"ADF pinch roll assembly removal" on page
"ADF feed/pick roll assembly removal" on page
A
Previous
4-192.
4-183.
Next
Go Back