Lexmark X792 Service Manual page 72

7562
Additional checks—461 paper jams
Error code
461.01
461.02
461.03,
461.08
461.04
461.05,
461.07
461.31,
461.32
2-32
Service Manual
Description
Hole punch sensor is made when the
printer powers up
Hole punch sensor early arrival paper
jam.
Possible cause:
• Loose Hole punch sensor
Hole punch sensor is never made or is
made late.
Possible cause:
• Faulty hole punch sensor
Hole punch sensor early leaving
paper jam.
Possible cause:
• Incorrect paper settings
• Defective hole punch sensor
Hole punch sensor breaks late or
never breaks paper jam.
Possible cause:
• Incorrect paper settings
• Defective hole punch sensor
Hole punch motor failure
Action
1. Clear away anything in the paper path that might
cause the paper to jam.
2. If clearing a paper jam does not fix the problem,
go to "461.01 - 461.08—Hole punch sensor
error service check" on page
1. POR the machine.
2. Check if the hole punch sensor is damage or
loose. See "HTU punch gear removal" on
page 4-419 to access the sensor.
1. Clear away anything in the paper path that might
cause the paper to jam.
2. If clearing a paper jam does not fix the problem,
go to "461.01 - 461.08—Hole punch sensor
error service check" on page
1. Clear away anything in the paper path that might
cause the paper to jam.
2. Be sure the paper settings match the media.
3. Go to "461.01 - 461.08—Hole punch sensor
error service check" on page
1. Clear away anything in the paper path that might
cause the paper to jam.
2. Be sure the paper settings match the media.
3. Go to "461.01 - 461.08—Hole punch sensor
error service check" on page 2-149
Go to "461.31, 461.32—Hole punch motor error
service check" on page 2-150.
Previous
Next
2-149.
Go Back
2-149.
2-149.