ADF platen cushion removal
See
"ADF covers" on page 7-23
1.
Lift the ADF unit assembly.
2.
Unfasten the velcro to remove the cushion.
Note: If you are removing the ADF platen cushion to access another part, then place the cushion on the
scanner glass with the velcro side up to protect the glass.
Installation note: Lay the ADF platen cushion on the scanner glass with the velcro side up, and then close the
ADF unit assembly.
for the part number.
7562
4-193
Repair information
Previous
Next
Go Back