Exiting The Diagnostics Menu; Registration - Lexmark T652 Service Manual

3
Release the buttons when the screen with the progress bar appears.

Exiting the Diagnostics menu

Note: This is applicable only to models T650, T652, and T654.
From the menu, select Exit Diagnostics to reset the printer. The printer then performs a POR, and returns to
Ready state.

Registration

Configure this setting to make sure printouts are aligned properly.
For models T650, T652, and T654
1
From the Diagnostics menu, select REGISTRATION.
2
Print a test page. For more information, see
determine what changes to make to the margin settings.
3
Configure any of the following margin settings.
Top Margin (value: ‑25 to +25)—A positive change moves the image down the page and increases the
•
top margin. A negative change moves the image up and decreases the top margin.
Bottom Margin (value: ‑20 to +20)—A positive change compresses the image so it appears to move
•
down the page and a negative change moves the image up.
Left Margin (value: ‑25 to +25)—A positive change moves the image to the left and a negative change
•
moves the image to the right. No compression occurs.
Right Margin (value: ‑99 to +99)—A positive change moves the image to the right and a negative change
•
moves the image to the left.
Notes:
•
Use the left or right arrow button to decrease or increase the values. You can press the Select button
to reset the values.
•
You need to print a test page every time you configure a margin setting in order to verify the
changes.
4
Press the Back button to exit REGISTRATION.
For model T656
1
From the Diagnostics menu, select REGISTRATION.
2
Print a test page. For more information, see
determine the changes you need to make to the margin settings.
3
Configure any of the following margin settings.
Top Margin (value: ‑25 to +25)—A positive change moves the image down the page and increases the
•
top margin. A negative change moves the image up and decreases the top margin.
Bottom Margin (value: ‑20 to +20)—A positive change compresses the image so it appears to move
•
down the page and a negative change moves the image up.
"Printing a quick test page" on page
"Printing a quick test page" on page
Service menus
236
4062
237. Retain this page to
237. Retain this page to