Finisher Or Stacker Controller Card Assembly Removal - Lexmark X792 Service Manual

Finisher or stacker controller card assembly removal

See "Finisher /High-capacity output stacker assembly" on page 7-37
1.
Remove the option from the printer.
2.
Remove the front cover. See
3.
Disconnect all cables from the controller card.
4.
Remove the three screws (A) securing the stapler/stacker controller card assembly.
5.
Remove the stapler/stacker controller card assembly.
Installation note: Be sure to place the black plastic under the controller card before you put the card in place.
"Finisher or stacker front cover removal" on page
for the part number.
4-337.
Repair information
7562
Previous
Next
Go Back
4-335