Adf Pick Pad Cover Assembly Removal - Lexmark X792 Service Manual

7562
Installation note: Make sure the notch (C) in the ADF media pinch pad fits around the ADF first scan sensor.

ADF pick pad cover assembly removal

See "ADF covers" on page 7-23
1.
Remove the ADF document tray assembly. See
page 4-174.
2.
Remove the ADF separator roll. See
3.
Remove the three screws (A).
4.
Lift to remove the ADF pick pad cover assembly.
4-188
Service Manual
for the part number.
"ADF document tray assembly removal" on
"ADF separator roll removal" on page 4-194.
Previous
Next
Go Back