Fuser Drive Assembly Removal - Lexmark X792 Service Manual

Installation note: After inserting the fuser assembly, push up the handles and then push up the tab under the
right handle.

Fuser drive assembly removal

See "Rear" on page 7-15
1.
Remove the rear cover. See
2.
Remove the fuser assembly. See
3.
Remove the E-clip (A) and the washer under it from the fuser gears, and then slide the gears off the post.
1
for the part number.
"Rear cover removal" on page
"Fuser assembly removal" on page
A (1126829)
1
2
4-23.
4-60.
Repair information
7562
Previous
Next
Go Back
4-61