200.38-Paper Jam Error Service Check - Lexmark X792 Service Manual

200.33, 200.38—Paper Jam error service check
Step Questions / actions
1 Remove the input tray.
Are the pick tires worn?
2 Open the left access door. Check the near
narrow media sensor flag (D) for damage.
Is the near narrow media sensor flag
damaged?
3 Is the staging deflector assembly
damaged?
4 Turn the printer off, and open the system
board shield. Check the cable in connector
JPP2 for proper connection to the system
board.
Is the cable properly connected?
Yes
Replace the pick tires. See
"Pick rolls removal" on
page 4-120.
Replace the near narrow
media sensor. See
"Sensor (input, S1,
narrow media, near
narrow media) removal"
on page 4-137.
Replace the staging
deflector assembly. See
"Staging deflector
assembly removal" on
page 4-138.
Go to step 5.
7562
No
Go to step 2.
Go to step 3.
Go to step 4.
Reseat the cable.
2-107
Diagnostic information
Previous
Next
Go Back