5-Bin Mailbox Feed Motor With Plate Removal - Lexmark X792 Service Manual

7562

5-bin mailbox feed motor with plate removal

See "5-bin mailbox assembly (interior)" on page 7-49
1.
Remove the mailbox from the printer.
2.
Remove the mailbox front cover. See
3.
Remove the printer circuit board. See
4.
Remove four screws (A), and remove the feed motor side plate.
5.
Squeeze the tabs and push up to release the option connector, and then slide the plate over the cable to
remove it.
4-318
Service Manual
for the part number.
"5-bin mailbox front cover removal" on page
"5-bin mailbox controller card removal" on page
Previous
4-319.
4-315.
Go Back
Next