System Board Cage With Board Removal - Lexmark X792 Service Manual

System board cage with board removal

1.
Remove the flatbed scanner assembly. See
2.
Remove the LVPS. See
3.
Remove two screws (A) to remove the RIP card shield from the system board.
4.
Squeeze the tab to disconnect the printer hard drive cable.
"Flatbed scanner assembly removal" on page
"Low-voltage power supply (LVPS) removal" on page
A (88A0232)
7562
4-226.
4-81.
4-157
Repair information
Previous
Next
Go Back