Sensor (Narrow Media) Static Jam Service Check; Sensor (Fuser Exit) Miscellaneous Jam Service Check - Lexmark M5150 Service Manual

Sensor (narrow media) static jam service check

Action
Step 1
Check the fuser for jammed media.
Is the fuser path free from jammed media?
Step 2
Check the sensor (fuser exit) for proper operation.
a
Enter the diagnostic mode.
b
Select Base sensor test.
c
Observe the line item fuser exit.
Does the display on the control panel change every time the sensing area
of the above sensor is interrupted or blocked?
Step 3
Check the above sensor for proper connection.
Is the above sensor connected properly?
Step 4
Perform a print test.
Does the problem remain?

Sensor (fuser exit) miscellaneous jam service check

Action
Step 1
Check the sensor (fuser exit) for proper operation.
a
Enter the diagnostic mode.
b
Select Base sensor test.
c
Observe the line item fuser exit.
Does the display on the control panel change every time the sensing area
of the above sensor is interrupted or blocked?
Step 2
Check the above sensor for proper connection.
Is the above sensor connected properly?
Step 3
Perform a print test.
Does the problem remain?
Yes
Go to step 2.
Go to
Replace the fuser. See
"Fuser removal" on
page
Go to step 4.
Contact the next
highest level of
technical support.
Yes
Go to
Replace the fuser. See
"Fuser removal" on
page
Contact the next level
of technical support.
Diagnostic information
84
No
Remove any jammed
media.
step 4. Go to step 3.
Reseat the connection.
Go to step 4.
459.
Problem solved.
No
step 3. Go to step 2.
Reseat the connection.
459.
Problem solved.
4063