Configuring The Fax/Modem/Cid Settings; Configuring The Rtp/Rtcp Settings; Figure 3-43: Fax/Modem/Cid Settings Page - AudioCodes Media Pack MP-124 User Manual

3.3.2.2

Configuring the Fax/Modem/CID Settings

The 'Fax/Modem/CID Settings' page is used for configuring fax, modem, and Caller ID
(CID) parameters. For a detailed description of the parameters appearing on this page,
refer to "Configuration Parameters Reference" on page 213.

To configure the fax, modem, and CID parameters:
1. Open the 'Fax/Modem/CID Settings' page (Configuration tab > Media Settings menu
> Fax/Modem/CID Settings
2. Configure the parameters as required.
3. Click the Submit
4. To save the changes to flash memory, refer to ''
3.3.2.3

Configuring the RTP/RTCP Settings

The 'RTP/RTCP Settings' page allows you to configure the Real-Time Transport Protocol
(RTP) and Real-Time Transport (RTP) Control Protocol (RTCP) parameters. For a detailed
description of the parameters appearing on this page, refer to "Configuration Parameters
Reference" on page 213.
SIP User's Manual
page item).

Figure 3-43: Fax/Modem/CID Settings Page

button to save your changes.
70
MP-11x & MP-124
Saving Configuration'' on page
Document #: LTRT-65412
167 .