Configuration - Bridge Filtering - Dynamix UM-A User Manual

4.3.2.6 Configuration – Bridge Filtering
Bridge Filtering allows packets to be forwarded or blocked, depending on the MAC address. The
Bridge Filtering configuration page allows you to set the configuration of MAC filtering.
There can be up to 4 different Bridge Filtering configurations.
Source MAC: This is the Source MAC to block or from which to forward. See the next page
for instructions on how to configure this. The Source MAC must consist of 12 hexadecimal
characters.
Destination MAC: This is the Destination MAC to block or to forward to. See the next page
for instructions on how to configure this. The Destination MAC must consist of 12
hexadecimal characters.
Type: Enter the hexadecimal number for the Ethernet type field in Ethernet_II packets. For
example, 0800 is for IP protocol. The Type must consist of 4 hexadecimal characters.
Block: When block is selected, everything from the Source MAC with destination MAC will
be blocked.
Forward: When forward is selected, everything from the Source MAC will be forwarded to
the Destination MAC.
4/1 Port ADSL Router P 71