Dynamix UM-A User Manual page 37

A. Bridge Mode: Bridge Mode is used when there is one PC connected to the LAN-side
Ethernet port. IEEE 802.1D method of transport bridging is used to bridge between the WAN
(ADSL) side and the LAN (Ethernet) side, i.e., to store and forward. There are two
encapsulation type for Bridge Mode :
i.
ii.
iii.
iv.
1483 Bridged IP LLC : If 1483 Bridged IP LLC mode is selected, select
"Enable" or "Disable" to activate the WAN configuration setting. Select
"Dynamic IP", which will automatically assigned by your ISP or "Static
IP", which will be provided by your ISP.
1483 Bridged IP VC-Mux : If 1483 Bridged IP VC-Mux mode is
selected, select "Enable" or "Disable" to activate the WAN
configuration setting. Select "Dynamic IP", which will automatically
assigned by your ISP or "Static IP", which will be provided by your ISP.
1483 Routed IP LLC : If 1483 Router IP LLC mode is selected, select
"Enable" or "Disable" to activate the WAN configuration setting. Select
"Dynamic IP", which will automatically assigned by your ISP or "Static
IP", which will be provided by your ISP.
1483 Routed IP VC-Mux : If 1483 Routed IP VC-Mux mode is selected,
select "Enable" or "Disable" to activate the WAN configuration setting.
Select "Dynamic IP", which will automatically assigned by your ISP or
"Static IP", which will be provided by your ISP.
4/1 Port ADSL Router P 36