Dynamix UM-A User Manual page 119

The configuration should look like the following when complete:
Note: It should be clear now how critical it is to sort the policies in the correct order. For
example, if policies one and two were switched, there would be NO HTTP access to any
computer in the LAN. This would make web browsing impossible.
B. Outbound Policy :
Sample Configuration: You want to deny all access to the WAN except for the following:
HTTP access from any IP through TCP.
Any access from 10.0.0.3 through any protocol.
FTP Access from 10.0.0.3~10.0.0.6 through any protocol.
Converting the access requirements from above so that the Outbound Policy can understand them
yields the following:
Deny all access from any Src (LAN) IP to any Des (WAN) IP through any source or
destination port and through any protocol.
Allow access from Src (LAN) IP 10.0.0.3 to any Des (WAN) IP through any port through
any protocol.
Allow access from any Src (LAN) IP to any Des (WAN) IP through port 80 (HTTP), through
TCP.
4/1 Port ADSL Router P 118